Cisco PowerVu D9858 Installation And Operation Manual page 71

Status Menu: TS Input,
Detail
Description:
Parameters:
PID
Description:
Parameters:
Pres
Description:
TS OUTPUT
OUTPUT
Output
Description:
Parameters:
Rate
Description:
Parameters:
Free
Description:
Parameters:
OUTPUT PIDS
PROGRAM PIDS
PE
Description:
Parameters:
Name
Description:
Parameters:
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
Indicates any detail associated with the program PID (e.g., MPG2
PID).
MPG1 VID, MPG2 VID, 422 VID, H264 VID, HD VID, MPG4 VID,
MPG AUD, MPG2 AUD, DVB AC3, DVB DDP, AAC AUD,
HEAAC, AUD, MPG4 AUD, DBE AUD, DTS AUD, DVB TXT, DVB
VBI, DVB SUBT, DVB ASYN, DVB SYNS, DVB SYND, DVB MPE,
DVB DCAR, DVB OCAR, SA VBI, ATSC AC3, ATSC DDP, SA
UTLD, SCTE DPI, SA HSD, SA CDDL, SA WBD, SA SUBT, ECM,
EMM, PCR, or UNKNOWN.
Indicates the program PID number.
1 to 8192.
Indicates whether the PID is present in the incoming stream.
Indicates the output type.
ASI or MPEGoIP.
Indicates the current output bit rate.
0 to 213 Mbps.
Indicates the available bit bandwidth (no stuffing).
Mbps.
Indicates the output Program Entry number.
1 to 4.
Indicates the name assigned to the Program Entry.
Up to 4 alphanumeric characters.
4-19