D9858 Advanced Receiver Transcoder Lock Levels - Cisco PowerVu D9858 Installation And Operation Manual

D9858 Advanced Receiver Transcoder Lock Levels

Four (4) lock levels (0, 1, 2, 3, and 4) are available for protecting your transcoder and
its settings against unauthorized use or modification (see the table below for full
details).
If a change made to the current Lock Level setting is not saved, the previously
saved setting is restored.
Note: The user cannot select NONE as a Lock Level.
Video
Parameter
PV Format
SD Format
Aspect Ratio
Parameter
SD Aspect Ratio
AR Selection
AR Conversion
WSS Mode
C-2 Model D9854 Advanced Program Receiver Installation and Operation Guide
Level Description
0 All settings are unlocked (transcoder lockout disabled)
1 All settings are unlocked except Factory Reset,
Password options and Transcoder parameters.
2 All settings are unlocked except RF and ASI Input
Tuning parameters.
3 All settings locked (access via password only), except
IP address and RF power.
4 All settings locked (access via password only, can be
changed via front panel remote terminal or PNC uplink
signal)
Lock Level
2
2
Lock Level
2
2
2
2
4023074 Rev B