Section B - Rear Connector Panel; Overview - Cisco PowerVu D9858 Installation And Operation Manual

Overview

D9858 Advanced Receiver Transcoder Rear Connector Panel
The following diagram shows the rear connector panel of the D9858 transcoder.
Connectors
The following table describes the function and type of the various connectors.
Connector
RF Inputs
Reference Input
ASI Input
ASI Outputs
Management
Cue Tone/Cue
Trigger Relay
Outputs
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide

Section B - Rear Connector Panel

Each input accepts an LNB signal
input. RF1 provides LNB power for
use when no external LNB power
source is available. RF2 to RF4
require an external LNB power
source.
For future use.
Asynchronous Serial Interface Input. BNC
Three Asynchronous Serial Interface
Outputs.
For upgrading the software
application (code downloading) for
the D9858 Advanced Receiver
Transcoder.
Program relay provides
programmed responses for alarms,
cue trigger states for ad-insertion
equipmnent, or a cue tone output for
connection to ad-insertion
equipment.
Function Connector Type
F
BNC
BNC
RJ45
9-pin sub-D female
3-5