Cisco PowerVu D9858 Installation And Operation Manual page 85

Setup Menu: TS Input: Tune Mode: Custom
PID
Description:
Parameters:
Type
Description:
Ins
Description:
Del
Description:
STATUS
Services List Mode
Description:
Parameters:
Frequency Tuning
Description:
Parameters:
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
This is one of the PID numbers currently assigned to this service.
0000 to 8192. While editing, this is the PID number to insert (Ins) or
add, edit or delete (Del).
This is the type of PID (aud1, data, etc.) being set up.
Note: The PCR PID must be the first one set up.
Select this option to add a PID to a channel.
Select this option to Delete the currently displayed PID.
Indicates which tables are used to obtain tuning and channel lists.
This values on this menu only apply when Tune Mode is set to
Custom.
Degraded or Rigorous. Rigorous means all the default settings must
be present in the received signal. Degraded means only the table
parameters present in the received signal will be used to install the
transcoder. The default is Rigorous Install.
The following table shows some possible configurations for the
allowed service lists.
Allowed Service Lists
BAT
NIT
SDT
PAT
Frequency Tuning
Indicates whether the transcoder is tuned to the received signal
using the NIT or a Preset.
NIT or Preset.
Auto Basic Custom
N N N
Y Y N
Y N N
Y N Y
NIT NIT Preset
Fixed PID
N
N
N
N
Preset
4-33