Status Menu: General - Cisco PowerVu D9858 Installation And Operation Manual

Status Menu: General

GENERAL
Input
Description:
Status
Description:
Parameters:
Rate
Description:
Parameters:
Level
Description:
Parameters:
CASys
Description:
Parameters:
Mode
Description:
Auth
Description:
Parameters:
4-12 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Indicates the active input port receiving the signal.
Indicates the current signal lock status for the selected RF input.
Signal Lock - see table.
Status
Locked Indicates the transcoder is locked to a
carrier with no valid content.
Lock+Sync Indicates the transcoder is locked to a
carrier with valid content.
No Lock Indicates the transcoder is not locked to a
carrier.
Indicates the bit rate of the received input signal
Mbps.
Indicates the signal level of received signal.
dBm.
Indicates the Conditional Access (CA) system used for the received
signal.
SA or BISS.
Indicates the type of CA used for the received signal, e.g., SA or
BISS.
Indicates whether the transcoder is authorized to receive the signal.
Yes or No.
Description
4023074 Rev B