Cisco PowerVu D9858 Installation And Operation Manual page 119

Setup Menu: Outputs: TS Out: DPM,
Synchronizing Output Services
To synchronize the output to the input Services Only:
This operation synchronizes the inputs to the outputs according to the service
assignments only. This is useful when you already have PID assignments set for the
services but want to ensure that the services are mapped correctly.
1. On the TS Out: DPM: ASI/MOIP1 menu, map the output services as desired.
2. Select PE Resync: Svcs. The transcoder will synchronize the PE output according
to the available input services only, and ignore the input to output service PID
mapping.
To synchronize the output PIDs to the input PIDs only:
This operation synchronizes the inputs to the outputs according to the PID
assignments only. This is useful when you have already set up the services that you
but want to synchronize to the incoming PIDS.
1. On the TS Out: DPM: ASI/MOIP1 menu, map the output services as desired.
2. Select PE Resync: PIDs. The transcoder will synchronize the PE output
according to the input PIDs only, and ignore the service assignment categories/
names.
To synchronize the output to All (Services and PIDs):
This operation synchronizes the inputs to the outputs of the current PMT according
to the service assignments and then the PID assignments. This is similar to a sample
and hold function.
1. On the TS Out: DPM: ASI/MOIP1 menu, map the output services as desired.
2. Select PE Resync: All. The transcoder will synchronize the PE output according
to the services and then the PIDs assigned to each service.
To synchronize the output to a Template:
Using a template allows you to preset the input to output mapping of a PE
according to the preset template. This is helpful in preconfiguring any number of
PEs for future use.
Note: You can change the stream category in any service box by selecting the
service box in the Out column and then scroll through the available categories. You
will be prompted to enter the Stream Instance, which is the stream number (e.g.,
AUD1, AUD2, etc.) before you save the new assignment.
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
4-67