Installation - Cisco PowerVu D9858 Installation And Operation Manual

Overview
Introduction
This chapter describes how to install the D9858 Advanced Receiver Transcoder.
Before installing the D9858 transcoder, read all the safety precautions and
guidelines thoroughly.
Qualified Personnel
Only appropriately qualified and trained personnel should attempt to install,
operate or maintain the D9858 Advanced Receiver Transcoder.
WARNING:
Allow only qualified personnel to install this product. Otherwise, personal
injury or equipment damage may occur.
In This Chapter
This chapter contains the following topics.
Section A - Rack Installation
General
Section B - Rear Connector Panel
Overview
Section C - Connecting the Input/Output Signals
Connecting the RF Inputs
Section D - Connecting the Input/Output Signals
Connecting the Video Outputs
Connecting the Audio Outputs
Connecting the Ethernet Management Interface
Connecting the IP TS Output
Connecting the ASI Outputs
Connecting an External Alarm System
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Chapter 3

Installation

Topic See Page
3-2
3-2
3-5
3-5
3-7
3-7
3-8
3-8
3-9
3-10
3-11
3-12
3-13
3-1