Section E - Power And General Specifications; General; Power - Cisco PowerVu D9858 Installation And Operation Manual

Section E - Power and General Specifications

General

LCD
Keypad
LEDs

Power

AC Power Connector
Type of connector
AC input
Power
Power Quality
Power
To operate the receiver, you must connect it to an AC power source.
WARNING:
Make sure that at least one end of the power cable(s) remains easily accessible
for unplugging, if you need to switch off the unit. For example: Ensure that the
socket outlet is installed near the product.
WARNING:
To avoid electrical shock, connect the three-prong plug on this product to an
earth-grounded three-pin socket outlet only.
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Item
2 lines of 40 characters, backlit LCD.
Arrow keys, 0 to 9, SELECT, MENU, INFO, ADV, MAP,
APPLY and NAV keys.
Green LED for Signal status, Red LED for Alarm indication.
Item
IEC 320 style C14 appliance receptable
100 to 240 V AC, 50/60 Hz
110 W max.
ANSI/IEEE Std C62.41.1-2002
Specification
Specification
A-13