Cisco PowerVu D9858 Installation And Operation Manual page 60

Startup Screen,
Continued
4. Directly enter the channel number using the 0 to 9 keys), followed by the
program channel for the selected PE.
5. Repeat this process to select a program channel for the two PEs, PE1 and PE2.
Deleting a Program from a Program Entry
To delete a program:
1. Press MENU until the startup screen appears.
PE
PE1 1
RF1
2. Navigate to the PE and the program that you want to delete.
PE #
PE1
RF1
3. Press SELECT to select the program number.
4. Press MAP to delete the program or alternatively enter program number 0 in the
PE entry to delete it. You can also use the MAP key to re-insert a program after
you have deleted it by simply pressing MAP again.
Program Entry Output Mode
A program can be set to one of four output modes, either Drop, Pass, Map, or
XCode respectively.
LCD Setting
Drop
Pass
4-8 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Ch #
Channel Name
Freq:12.658 Lvl:100 Marg:9.9e-9
Ch #
706 Channel Name
Freq:12.658 Lvl:100 Marg:9.9e-9
Removes the service and its associated PMT reference from
the transport output.
Permits the source content and PMT reference to appear in
the transport output with the same references unless the
source material is MAPped on another PE.
s
s
Description
4023074 Rev B