Cisco PowerVu D9858 Installation And Operation Manual page 76

Setup Menu: Admin,
LCD Contrast
Description
Parameters:
DL Mode
Description
Parameters:
DL FPGA
Description
Parameters:
DL Status, Type, Bank
Description
Parameters:
Limit Version
Description
Parameters:
4-24 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
Adjusts the contrast of the LCD menu panel.
1 (lowest contrast) to 30 (highest contrast).
Sets the download mode.
FPGA Once, Always or Never.
DL Mode Setting
Always
FPGA Once
Never
Note: Forced downloads (initiated by the uplink) are always
accepted and always result in a reboot of the transcoder. Service
interruption will occur!
Sets the FPFA download mode.
Enable or Disable.
Indicates the DL Mode status, type and bank (i.e., type of code).
DL Status - Idle, Running, Timeout. Idle indicates the transcoder is
waiting for a download. Running indicates the transcoder is
processing a download. Timeout indicates the transcoder didn't
complete the download.
Type - rearpanel is only supported at present.
Bank - the type of code, either Application or FPGA.
Indicates the current FPGA version number.
Read-only alphanumeric value.
Description
Unforced download will be
accepted and saved in memory.
An unforced download will be
accepted, followed by a reboot of
the transcoder, and the DL Mode
will change to Never.
Unforced downloads will not be
accepted.
4023074 Rev B