Cisco PowerVu D9858 Installation And Operation Manual page 106

Setup Menu: Outputs: TS Out: MOIP1,
Descramble Mode
Description:
Parameters:
Regenerate
Description:
Parameters:
Insert Null Packet
Description:
Parameters:
Instance Name
Description:
Parameters:
MPEGoIP
Description:
Parameters:
SAP
Description:
Parameters:
SAP ID
Description:
Parameters:
4-54 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
This parameter selects whether the transcoder should scramble the
output even if it is authorized to receive the channel.
Scrambled or Descrambled. Default is Descrambled.
Descramble
Mode
Scrambled
Descrambled
This selects whether to regenerate the PSI tables.
Always or As Needed (only if the content has changed).
This parameter selects whether to insert null packets in the output
stream.
Yes or No.
This is the DPM output instance name.
Up to 31 characters.
Selects the transport protocol to be used for the output stream.
RTP or UDP.
This selects whether to send Session Announcement Protocol
messages.
No or Yes.
This is the SAP identifier (ID)/string.
Up to 49 characters.
Description
Scrambles the output channel even if the PE
is authorized and can descramble the
channel. This setting is not valid for
transcoded programs.
Descrambles the output channel, and passes
in-the-clear channels.
4023074 Rev B