Section D - Connecting The Input/Output Signals; Connecting The Video Outputs - Cisco PowerVu D9858 Installation And Operation Manual

Section D - Connecting the Input/Output Signals

Connecting the Video Outputs

Connector for the Video Outputs
The video output connectors are of the BNC type.
Video Connector
The following table shows the video connector.
Connector
To Connect the Composite Video Ouput
Do as follows to connect to the Composite Video Output:
1. Connect a video monitor to the CVSB 1 and CVSB2 connectors. The two outputs
are identical.
Use a 75-ohm double-braided coax cable.
3-8 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Interface type
SMPTE 292M BNC female
Connector type
4023074 Rev B