Section A - L-Band Input And Processing; General; Lnb Lo Stability; Lnb Power And Control - Cisco PowerVu D9858 Installation And Operation Manual

Section A - L-Band Input and Processing

General

System
Demodulation
Number of RF Inputs

LNB LO Stability

DVB-S and DVB-S2
1 to 4.99 MSymbols/s
5.0 to 9.99 MSymbols/s
10.0 to 45 MSymbols/s
LNB Phase Noise Requirement

LNB Power and Control

Voltage
(RF1to RF3, RF4 does not have an
LNB supply)
Current
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Parameter
Symbol Rate
Parameter
Parameter
Specification
MPEG-2/DVB Compatible
DVB-S EN 300 421, EN 300 468
DVB-S QPSK, DVB-S2 QPSK and 8PSK
4 (only one can be active at a time)
Stability
≤ ± 125 kHz
≤ ± 1.0 MHz
≤ ± 3.0 MHz
Specification
-35 dBc/Hz at δF = 100 Hz
-53 dBc/Hz at δF = 1 kHz
-76 dBc/Hz at δF = 10 kHz
-96 dBc/Hz at δF = 100 kHz
-106 dBc/Hz at δF = 1 MHz
-117 dBc/Hz at δF = 10 MHz
Specification
13 V Vertical/circular right,
18 V Horizontal/circular left
Off
350 mA maxmium
LNB Alarms:
No load - 6 mA
Overload - 360 mA minimum
A-3