Keypad Convention - Cisco PowerVu D9858 Installation And Operation Manual

Keypad Convention

Overview
Throughout this manual, there are references to parts of a
keypad on the front of the transcoder. This is the
Navigation/Selection keypad (see diagram at right), which
changes its function, depending on the current state of the
menu. For clarity, the following table shows which parts of
this integral interface are being referenced by which term.
Keypad Button
SELECT
LEFT arrow
UP arrow
RIGHT arrow
DOWN arrow
Key
LEFT arrow
RIGHT arrow
UP arrow
DOWN arrow
SELECT
4-4 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Runs the highlighted command or opens the highlighted menu.
When moving through menus, highlights the menu item to the
left. When entering data, moves the cursor to the left. In some
menus, backspaces over the data entry.
Highlights the menu item above.
When moving through menus, highlights the menu item to the
right. When entering data, moves the cursor to the right.
Highlights the menu item below.
Function
Press the key on the left side of the
Navigation/Selection Keypad.
Press the key on the right side of the
Navigation/Selection Keypad.
Press the key on the top of the
Navigation/Selection Keypad.
Press the key on the bottom of the
Navigation/Selection Keypad.
Press the key in the center of the
Navigation/Selection Keypad.
Function
Keypad Button
4023074 Rev B