Cisco PowerVu D9858 Installation And Operation Manual page 87

Setup Menu: IP,
Continued
IP
Port ID
Description:
Parameters:
Description
Description:
Parameters:
V4/V6
Description:
Parameters:
IP Address
Description:
Parameters:
Mask
Description:
Parameters:
Gateway
Description:
Parameters:
MAC Address
Description:
Parameters:
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Displays the ID for the Ethernet port.
1 to 3. The default is 1.
Sets the description or name for the Ethernet port.
Up to 20 alphanumeric characters in length.
Displays the TCP IP communication protocol version supported on
the Ethernet port.
This value is not editable. Only V4 is currently supported.
Sets the IP Address for its participation in a Network environment.
Up to 12 digits in length.
Sets the Subnet Mask for its participation in a Network
environment.
Up to 2 digits in length.
Sets the Network Gateway Address on the Network, used to expose
the transcoder to a WAN.
The IP Address/Mask and Gateway Address should be changed
together, i.e., as a group. The following table shows the most
commonly used Subnet mask values to enter for a chosen IP
address mask, which will depend on the size of your network.
Mask
8
16
24
Displays the MAC address of the transcoder. It is set at the factory
and is a read-only value.
N/A.
Subnet Mask
255.0.0.0
255.255.0.0
255.255.255.0
4-35