Setup Menu: Outputs: Ts Out: Dpm - Cisco PowerVu D9858 Installation And Operation Manual

Setup Menu: Outputs: TS Out: DPM

Structure
To view the DPM menu from the TS Out menu, press the RIGHT arrow key twice.
The DPM menu provides access to functionality associated with Global and ASI
and MOIP1 outputs.
The DPM menu allows you to groom functionality on a program basis where
individual service PID modifications are provided on a limited scale.
Use the digital program mapping features to:
• configure the transport output bit rate
• configure the output mode for a program entry
• configure the service and PID output settings in a program entry
The DPM menu has the following structure:
Global
Resync All: ASI MOIP1
Copy: ASI->MOIP1 MOIP1->ASI
ASI
PE InCh PMT Act OutCh PMT PID
PE1 65535 8191 Map 65535 8191
InTyp In PID Act OutType In PID
UNKN 04 1234 Map UNKNxFF 05 1234
Map Mode Duplic Mode
Svc ID & PID PSI Remap
PSI Options PSI Rate Service ID
Ctl By Table MPEG Min Valid Ch
PAT CAT PMT TSDT NIT
Regen Regen Regen Drop Regen Drop
SDT SDTO BAT EIT TDT
Regen Drop Drop Drop Drop Drop
TOT DIT SIT ECM EMM DRT
Drop Drop Drop Drop Drop Drop Drop
PE Resync: All Template PIDs Svcs
PE1
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Main:Setup:Outputs:TS Out:DPM
Global ASI MOIP1
i s
i s
i s
i s
Unref
i s
Drop
i s
NITO
i s
RST
i s
CDT
i s
i s
i s
MOIP1
PE InCh PMT Act OutCh PMT PID
PE1 65535 8191 Xcode 65535 8191
InTyp In PID Act OutType In PID
UNKN 04 1234 Xcode UNKNxFF 05 1234
Map Mode Duplic Mode
Svc ID & PID PSI Remap
PSI Options PSI Rate Service ID
Ctl By Table MPEG Min Valid Ch
PAT CAT PMT TSDT NIT
Regen Regen Regen Drop Regen Drop
SDT SDTO BAT EIT TDT RST
Regen Drop Drop Drop Dro Drop
TOT DIT SIT ECM EMM DRT
Drop Drop Drop Drop Drop Drop Drop
PE Resync: All Template PIDs Svcs
PE1
i s
i s
Unref
i s
Drop
i s
NITO
i s
i s
CDT
i s
i s
4-57