Status Menu: Services - Cisco PowerVu D9858 Installation And Operation Manual

Status Menu: Services

SERVICES
VIDEO
Video
Description:
Parameters:
Rate
Description:
3:2 Pulldown
Description:
Parameters:
FPS
Description:
Stream AR
Description:
Parameters:
Act Conv
Description:
Parameters:
AUDIO
AUD
Description:
Parameters:
Format
Description:
Parameters:
4-14 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Indicates the input stream type and source resolution of the
received signal/program.
SD480i/2997, SD480i/3000, SD576i/2500, HD720p/5000, HD720p/
5994, HD720p/6000, HD1080i/2500, HD1080i/2997, HD1080i/
3000, Unknown or Unsupported.
Indicates the bit rate of the received video program.
Indicates whether 3:2 pulldown mode is detected.
Yes, No or Recent.
Indicates the frame rate in frames per second.
Indicates the stream aspect ratio. This is the conversion that the
transcoder will perform on the incoming signal for the picture to be
displayed correctly (i.e., to correspond to the aspect ratio of your
TV) on your TV, based on your selection.
4:3, 14:9 or 16:9.
This is the type of aspect ratio conversion that the transcoder will
perform based on your selection.
None, 4:3 L/B, 4:3 P/B, 14:9, 14:9, 4:3 F/H, or 16:9 F/W.
Indicates the audio channel within the stream when the signal
contains more than two audio pairs.
AUD1 for audio channel Aud1.
AUD2 for audio channel Aud2.
AUD1 to AUD4 for two stereo audio channels.
Indicates the received audio channel format.
MPEG, AC3, AAC, HEAAC or DDP.
4023074 Rev B