Cisco PowerVu D9858 Installation And Operation Manual page 113

Setup Menu: Outputs: TS Out: DPM
Parameters:
PSI Options
Description:
Parameters:
PSI Rate
Description:
Parameters:
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
Drop or Pass. Default is Drop.
Output
ASI
MOIP1
This option allows the operator to specify which PSI tables to
include in the program/output stream.
Pass All, Drop All or Control by Table.
PSI Options
Pass All
Drop All
Control by Table
This selects the DPM regeneration rate. This applies the PowerVu
rates (consistent with the uplink).
Auto, MPEG Min or SA Std.
PSI Rate
Auto
MPEG Min
SA Std
Unref
Pass, Drop
Pass, Drop
Description
Transmits the incoming PSI Tables as is;
does not modify the content and rate.
Does not transmit any PSI Tables.
The operator can enter the Tables menu to
select the output mode for each table. The
default table selections will be all pass, and
only with CDT dropped.
Description
Matches the generated PSI tables' output
rate as the incoming rate.
Transmits the generated PSI tables on the
longest intervals that are allowed by the
MPEG standard.
Transmits the generated PSI tables based on
PowerVu standard intervals.
4-61