Cisco PowerVu D9858 Installation And Operation Manual page 108

Setup Menu: Outputs: TS Out: MOIP1,
MGMT Port Mode
Description:
Parameters:
DATA Port Mode
Description:
Parameters:
SAP Multicast Address
Description:
Parameters:
PCR Addition
Description:
Parameters:
4-56 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
This selects the Interface 1 MPEGoIP mode.
No Output, IGMP or Always Output.
Intf1 Mode
Intf2 Mode
No Output Disables the MPEGoIP interface.
IGMP Only outputs data when requested via IGMP.
Always Output Always outputs data on the port.
This selects the Interface 2 MPEGoIP mode.
No Output, IGMP or Always Output.
Intf1 Mode
Intf2 Mode
No Output Disables the MPEGoIP interface.
IGMP Only outputs data when requested via IGMP.
Always Output Always outputs data on the port.
This is the SAP destination IP address.
0 to 255 for each of the four fields in the format ###.###.###.###.
This selects whether to add a PCR to the output stream.
Yes or No.
Description
Description
4023074 Rev B