Setting Up The Asi Output - Cisco D9858 Installation And Configuration Manual

Chapter 2 Quick Setup - Read Me First!

Setting up the ASI Output

1 Press MENU to move to the Main Menu.
2 Press
3 Press
4 Press
5 Press SELECT to access the ASI menu. Press . Press SELECT. Use
the output mode. The factory default is "No Output". We recommend to set the
Output Mode to Transcoding.
6 Press SELECT. Press
SELECT.
7 Press
scrambling mode. Press SELECT.
8 Press
mode to Yes. Press SELECT.
9 Press APPLY. Press SELECT.
10 Press MENU five times to return to the startup menu.
16
to move to the Setup menu. Press SELECT.
to move to the Outputs menu. Press SELECT.
to move to the TS Out menu. Press SELECT.
to select Yes if requested to "RESYNC ALL?". Press
to move to Descramble Mode menu. Press SELECT. Use
to move to Insert Null Packet. Press SELECT. Use
to select
to select the
to change the