Editing Network Presets; Setting Up Lnb - Cisco D9865 Installation And Configuration Manual

Chapter 4 Setup and Monitoring via On-Screen Display

Editing Network Presets

You can edit or pre-configure any one of 64 presets without affecting the operation of the receiver.
To save or change a network preset:
Enter a Preset Number and a name directly to below the Preset Number. Follow the editing rules for the
Step 1
keys when entering characters in the Name field.
Step 2 Enter the appropriate settings as described in the preceding table. Ensure that the LNB selection
corresponds to the correct downlink frequency.
Step 3 Press OK to save the preset.

Setting up LNB

Proceed as follows to set up the LNB:
From the Preset/LNB Setup menu, press the yellow button (LNB) to set up the LNB.
Step 1
Note
Step 2 The following table describes each of the options:
Selection
LNB Configuration
OL-31085-01
You can configure up to 10 LNB presets.
Options
1 to 10
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Description
Number identifying the current preset LNB
configuration.
Setup Menu
4-19