Philips Sopho 2000 IPS User Manual page 844

When displaying PMS information on an Administrative station, a Front Desk Terminal, do the following
programming in addition to the programming of MP built-in PMS on IP.
[Series 3400 software required]
START
CM08 Provided the system with Name Display ser-
vice.
Specify the time to go back to Data and Time
display after the call answered.
Specify the duration to display the name.
CM35 Assign a trunk name number to each trunk
route.
CM77 Enter the desired station user name to each sta-
tion number by CM77 Y=0 or Y=1.
A
DESCRIPTION
HOTEL SYSTEM PROGRAMMING
PROPERTY MANAGEMENT SYSTEM INTERFACE
(1) 255
(2) 1 : To provide
(1) 120
(2) 0 : 10 seconds later
1 : 6 seconds later
(1) 121
(2) 0 : Until call finished
1 : As per CM08>120
• Y=03
(1) 00-63: Trunk Route No.
(2) 00-14: Trunk Name No.
15 : Kind of trunk route assigned by
CM35 Y=00 are displayed
16-63: Trunk Name No.
• Y=0 By Character Code
(1) X-XXXXXX: Station No.
(2) 20-7F: Character Code
Maximum 32 digits
See APPENDIX B:
Page B2
• Y=1 By Character
(1) X-XXXXXX: Station No.
(2) A-Z, 0-9: Character
Maximum 16 characters
– 826 –
DATA
Character Code Table.
NWA-008845-001 Rev.5.0
32ch2001.fm
JUNE/01/2007