Philips Sopho 2000 IPS User Manual page 60

A
CM41
Specify the duration of an Announcement.
CM20 To record, replay, or delete a message, assign
the respective Digital Announcement Trunk
access code.
END
NOTE: A voice message can be sent to incoming C.O. lines during Night Mode.
• Different messages can be programmed on each C.O. line.
• The voice message can be programmed for Day/Night.
• More than one connection can be made to a Digital Announcement Trunk Circuit. Only the
first connection can be assured of hearing the message from the beginning.
• Announcements may be programmed to be repeated from 4 to 120 seconds in four-second in-
crements.
HARDWARE REQUIRED
DAT card or MP card (built-in DAT)
DESCRIPTION
• Y=0
(1) 45
(2) 01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 60-64
seconds.
• Y=0-3 (Numbering Plan Group 0-3)
(1) X-XXXX: Access Code
(2) A100: Record
A101: Replay
A102: Delete
– 42 –
ANNOUNCEMENT SERVICE
DATA
NWA-008845-001 Rev.5.0
32ch1001.fm