Philips Sopho 2000 IPS User Manual page 585

A
CM12 Specify the TAPI ADAPTER mode of D
[Series 3200 R6.1 software required]
NOTE 1: When using D
ADAPTER on D
NOTE 2: When the TAPI ADAPTER is not
used, set "3".
NOTE 3: For PN-2DLC/4DLC cards, this
data must be assigned to the first
LEN (Level 0) of each card.
For 8DLC cards, this data must be
assigned to the first LEN (Level 0)
and the fifth LEN (Level 4) of each
card.
Specify the kind of D
NOTE: After the 2nd data of CM12 Y=24 is
changed, pull out and reconnect the
modular connector of the D
CM90 Specify whether call termination on each line
key is indicated on the Call Indicator Lamp or
not.
CM08 Assign the Outgoing Call Preset/Answer Pre-
set functions to D
Specify whether the answer key rings on TAS
and Pooled Line or not.
CM41 Specify the Delayed Ringing timing.
B
DESCRIPTION
term
65 TAPI
term
75, set "0".
term
.
term
term
, if required.
PROPRIETARY MULTILINE TERMINAL
term
. • Y=17
(1) X-XXXXXXXX: My Line No.
term
(2) 0 : D
(D
3 : Not used
• Y=24
(1) X-XXXXXXXX: My Line No.
(2) 0 : 24 Line/Trunk/Feature keys + 8/12
One Touch keys
. 7 : 16 Line/Trunk/Feature keys + 16/20
One Touch keys
• Y=05
(1) My Line No. +
(2) 0 : Not indicated
1 : To indicate
(1) 145
(2) 0 : Available
1 : Not available
(1) 116
(2) 0 : Available
1 : Not available
• Y=1
(1) 09
(2) 01-10: 2-20 seconds
If no data is set, the default setting is 10 seconds.
– 567 –
DATA
65 TAPI ADAPTER on D
term
Series E)
,
+ Key No.
(2 second increments)
NWA-008845-001 Rev.5.0
JANUARY/20/2006
term
75
32ch1009.fm