Add-On Module - Philips Sopho 2000 IPS User Manual

ADD-ON MODULE

PROGRAMMING
START
CM10 Assign the Add-On Module number to its asso-
ciated LEN.
NOTE:
CM14
Assign the Add-On Module number to its asso-
ciated LEN.
[Series 3200 R6.2 software required]
NOTE:
CM98
Assign the D
Add-On Module.
NOTE:
Assign the Service Restriction Class for the
accommodation of Single-Line Telephone to
term
D . (Assignment for Single-Line Telephone
only).
CM90 Assign the station and trunk numbers to the
keys on each Add-On Module.
NOTE:
A
DESCRIPTION
When the data assignment of both
DSS Console and Add-On Module
are required, the same number (the
last two digits of the data) cannot be
used.
When the data assignment of both
DSS Console and Add-On Module
are required, the same number (the
last two digits of the data) cannot be
used.
term
which is associated with the
term
The D and the Add-On Module
must be in the same PIM.
Single-Line, Virtual Line or My Line
can be assigned on Add-On Module.
(1) 000-763: LEN
(2) EC00-EC31: Add-On Module No.
For PIM0/1 : EC00-EC07
For PIM2/3 : EC08-EC15
For PIM4/5 : EC16-EC23
For PIM6/7 : EC24-EC31
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) EC00-EC31 : Add-On Module No.
For FP No. 00: EC00-EC07
For FP No. 01: EC08-EC15
For FP No. 02: EC16-EC23
For FP No. 03: EC24-EC31
• Y=0
(1) 00-31: Last two digits of Add-On
Module No.
EC00-EC31
(2) X-XXXXXXXX: My Line No.
• Y=05
(1) X-XXXXXXXX: Station No.
(2) 0: Accommodated
• Y=00
(1) My Line No. +
No. (30-54)
(2) X-XXXXXXXX: Station No.
DXXX
XXX: 000-255 (Trunk No.)
– 22 –
ADD-ON MODULE
DATA
NOTE
NOTE
,
+ Add-On Module Key
NOTE
NWA-008845-001 Rev.5.0
32ch1001.fm