Philips Sopho 2000 IPS User Manual page 306

A
CMAA Assign the necessary functions to the DTI
card.
After entering the data, set the MB switch on
the DTI card to UP, and then to DOWN, for
DTI initialization.
NOTE: The following table shows the
relationship between CMAA Y=01
and CMAA Y=02.
CMAA Y=01
(FRAME
CONFIGURATION)
24-Multi Frame [1]
12-Multi Frame [0]
[ ]: Indicates 2nd data
Select the card for DTI T1 interface.
B
DESCRIPTION
DTI INITIAL
CMAA Y=02
(ZERO CODE
SIGNALING
SUPPRES-
SION)
B8ZS
Not available
Transparent
[1]
Available [0] B7
INITIAL
• Y=00 Data Mode
(1) 04-15, 20-31: AP No. assigned by CM05
(2) 0: Based on AT&T Specifications
• Y=01 Frame Configuration
(1) 04-15, 20-31: AP No. assigned by CM05
(2) 0 : 12-Multi Frame (D4)
1 : 24-Multi Frame (ESF)
• Y=02 Zero Code Suppression
(1) 04-15, 20-31: AP No. assigned by CM05
(2) 0 : Available (Non Transparent)
1 : Not available (Transparent)
• Y=03
(1) 04-15, 20-31: AP No. assigned by CM05
(2) 7 : Associated Channel Interoffice Sig-
naling
• Y=14
(1) 04-15, 20-31: AP No. assigned by CM05
(2) 0 : PN-24PRTA/PN-DTA
1 : PN-24DTA-C
– 288 –
DIRECT DIGITAL INTERFACE
PROGRAMMING
DATA
Y=0
Y=0
Y=0
Y=0
Y=0
NWA-008845-001 Rev.5.0
32ch1005.fm
JULY/01/2006