Philips Sopho 2000 IPS User Manual page 348

(7) For ISDN Indial calls
• To distinguish by the trunk route
START
CM35 Specify the interval of ringing tones for station
on incoming calls.
NOTE:
END
• To distinguish by the terminating ISDN Indial number
START
CM08 Assign the interval of ringing tones as "As per
CM76 Y=22".
CM76 Specify the interval of ringing tones on ISDN
Indial calls.
For this assignment, do not set CM76 Y=22 to
3 (As per CM35 Y=33 (D
END
DESCRIPTION
For incoming calls to a Trunk-Di-
rect Appearances key on D
special ringing; 0.2 seconds ON-0.2
seconds OFF will be applied.
DESCRIPTION
term
or SLT)).
• Y=33
(1) 00-63: Trunk Route No.
(2) 0 : 0.4 seconds ON-0.2 seconds OFF-0.4
term
s, the 1 : 0.4 seconds ON-0.2 seconds OFF-0.4
2 : 1 second ON-2 seconds OFF
3 : 2 seconds ON-4 seconds OFF
(1) 180
(2) 1 : As per CM76 Y=22
• Y=22
(1) 000-999: Number Conversion Block No.
(2) 0: 0.5 seconds ON-0.5 seconds OFF
(D
1.0 second ON-2.0 seconds OFF (SLT)
1: 0.5 seconds ON-0.5 seconds OFF-
0.5 seconds ON-1.5 seconds OFF
(D
0.4 seconds ON-0.2 seconds OFF-
0.4 seconds ON-2.0 seconds OFF (SLT)
2: 1.0 second ON-2.0 seconds OFF (D
or SLT)
– 330 –
DISTINCTIVE RINGING
DATA
seconds ON-2 seconds OFF
seconds ON-2 seconds OFF
DATA
assigned by CM76 Y=00/90
term
)
term
)
NWA-008845-001 Rev.5.0
term
32ch1006.fm