Philips Sopho 2000 IPS User Manual page 330

A
CM76 When providing DISA to the DID calls, assign
the data for converting the received digits to
DISA. See DID DIGIT
Page 303
CM2A Assign the ID Code Development number for
DISA.
Assign the ID Code for DISA.
Assign the desired Trunk Restriction Class for
each ID Code Pattern number.
Assign the desired Service Restriction Class A
to each ID Code Pattern number. The features
available in each class are assigned by CM15.
Assign the desired Service Restriction Class B
to each ID Code Pattern number. The features
available in each class are assigned by CM15.
B
DESCRIPTION
CONVERSION.
DIRECT INWARD SYSTEM ACCESS (DISA)
• Y=01 Day Mode
• Y=02 Night Mode
• Y=03 Mode A
• Y=04 Mode B
(1) 000-999: Number Conversion Block No.
(2) D16: DISA
• Y=A0
(1) 2
(2) 0-9: ID Code Development No. 00-09
NOTE: CM2A Y=00-09 is determined by this
data.
• Y=00-09 ID Code Development No. 00-09
(1) X-XX...XX (Maximum 16 digits): ID Code
for DISA
(2) 0000-2999: ID Code Pattern No.
• Y=11
(1) 0000-2999: ID Code Pattern No.
(2) 1 : Unrestricted (RCA)
2 : Non-Restricted-1 (RCB)
3 : Non-Restricted-2 (RCC)
4 : Semi-Restricted-1 (RCD)
5 : Semi-Restricted-2 (RCE)
6 : Restricted-1 (RCF)
7 : Restricted-2 (RCG)
8 : Fully-Restricted (RCH)
• Y=12
(1) 0000-2999: ID Code Pattern No.
(2) 00-15 : Service Restriction Class A
• Y=13
(1) 0000-2999: ID Code Pattern No.
(2) 00-15 : Service Restriction Class B
– 312 –
DATA
assigned by CM76 Y=00/90
NWA-008845-001 Rev.5.0
32ch1006.fm