Philips Sopho 2000 IPS User Manual page 228

< Data Programming >
COMMAND 1st DATA
CM35 Y=174
CM2A Y=50
CM2A Y=50
CM76 Y=01
CM76 Y=01
CM76 Y=09
CM76 Y=05
2nd DATA
00 0
1234 020
2345 021
020 D13
021 D04
020 01
020 01
Provide the calling number development with the
Development Pattern 0 for trunk route number 00.
Assign the Development Block number 020 for the
calling party number 1234.
Assign the Development Block number 021 for the
calling party number 2345.
Assign TAS in Day Mode to the Development Block
number 020.
Assign Direct-In Termination in Day Mode to the
Development Block number 021.
Assign the station tenant number 01 to Development
Block number 020.
Assign the trunk tenant number 01 to Development
Block number 020.
– 210 –
CID CALL ROUTING
REMARKS
NWA-008845-001 Rev.5.0
32ch1004.fm