Background Music - Philips Sopho 2000 IPS User Manual

BACKGROUND MUSIC

PROGRAMMING
START
CM10 Assign BGM Interface trunks (COT card/TNT
card) to the required LEN.
NOTE:
CM14
Assign BGM Interface trunks (COT card/TNT
card) to the required LEN.
[Series 3200 R6.2 software required]
NOTE:
CM12 Assign Service Restriction Class A to the
required D
CM15 Allow Background Music on D
Restriction Class A assigned by CM12 Y=02.
CM20 Assign the access code for this feature.
CM30 Assign a trunk route number to the BGM Inter-
face trunk (COT card/TNT card).
CM35 Assign the BGM interface to each trunk route.
CM48 Assign a BGM program number to each trunk
number connected to the BGM source.
END
DESCRIPTION
The TNT trunk number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
The TNT trunk number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
term
s.
term
(1) 000-763: LEN
(2) D000-D255: COT/TNT Trunk No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) D000-D255: COT/TNT Trunk No.
• Y=02
(1) X-XXXXXXXX: My Line No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
in Service • Y=32
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access code (66)
(2) A039: BGM on D
• Y=00
(1) 000-255: Trunk No.
(2) 00-63: Trunk Route No.
• Y=00
(1) 00-63: Trunk Route No.
(2) 05: Interface with BGM Tone Source
• Y=4
(1) 00-09: BGM program No. 0-9
(2) D000-D255: Trunk No. connected to BGM
INITIAL
– 128 –
BACKGROUND MUSIC
DATA
signed by CM12 Y=02
term
Source
NWA-008845-001 Rev.5.0
32ch1002.fm