Philips Sopho 2000 IPS User Manual page 728

To provide enhanced Trunk-Direct Appearances on Analog trunk:
START
CM90 Program enhanced Hold key to each D
Program Trunk Answer key.
CM20 Assign Trunk Answer to be used for
analog telephones.
Assign Trunk Hold to be used for
analog telephones.
CM30 Assign ID code for each C.O. trunk.
CM08 Assign Answer preference.
CM51 Assign Hold Recall to alternate destination.
END
NOTE:
If the incoming call is routed via the Internal Automated Attendant feature (DAT card), the ten-
ant number programmed in CM49 Y=01 must match the tenant number programmed in CM20
Y=01 for the incoming trunk.
DESCRIPTION
term
TRUNK-DIRECT APPEARANCES
. • Y=00
(1) My Line No. +
(2) F0058: Hold Key
(1) My Line No. +
(2) F0059: Trunk Answer Key
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A059: Trunk Answer
(1) X-XXXX: Access Code
(2) A058: Trunk Hold
• Y=19
(1) 000-255: Trunk No.
(2) ABCD: Trunk ID code
(1) 114
(2) 0 : Answer by 2-digit Trunk ID code
[Answer Code+Trunk ID Code (CD)]
1 : Answer by 4-digit Trunk ID code
[Answer Code+Trunk ID Code (AB-
CD)]
• Y=21
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: Station No.
– 710 –
DATA
,
+ Key No.
,
+ Key No.
NWA-008845-001 Rev.5.0
32ch1011.fm
NOVEMBER/15/2006