Philips Sopho 2000 IPS User Manual page 161

A
CM41 Specify the timing of Call Forwarding-No An-
swer for a trunk incoming call.
Specify the timing of Call Forwarding-No An-
swer for an internal call or an assisted call.
CM35 To apply this feature to incoming calls, set the
trunk route combinations for Tandem Connec-
tion.
CM36 NOTE: For Resident System Programming,
refer to the Command Manual.
CM08 Specify the setting method for Call Forward-
ing-No Answer-Outside.
Assign whether an extension can set a destina-
tion of Call Forwarding-No Answer-Outside
by entering only a trunk access code.
B
DESCRIPTION
• Y=0
(1) 01 : Timing for a trunk incoming call
100: Timing for a trunk incoming call
[Series 3100 software required]
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36
seconds.
• Y=0
(1) 15 : Timing for an internal call or an assist-
ed call
101: Timing for an internal call or an assist-
ed call
[Series 3100 software required]
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36
seconds.
• Y=05
(1) 00-63: Trunk Route No.
(2) 1 : Release signal arrives
• Y=0
(1) Incoming Trunk Route No. + Outgoing
Trunk Route No. assigned by CM35 Y=05
(2) 0: Allow
(1) 222
(2) 0 : Setting when the station goes on hook/
when receiving Service Set Tone
(ORT time out)
1 : Setting when receiving Service Set
Tone (ORT time out)
(1) 386
(2) 0 : Restricted
1 : Allowed
– 143 –
CALL FORWARDING
CALL FORWARDING-NO ANSWER
DATA
(4 second increments)
(4 second increments)
NOTE
NOTE
NWA-008845-001 Rev.5.0
32ch1003.fm