Philips Sopho 2000 IPS User Manual page 209

A
CM12 Specify the calling party information which is
sent to the analog telephone for Caller ID-
Station.
CM08 Specify whether the calling station number is
sent to the analog telephone for Caller ID-
Station when an internal call is terminated.
CM50 To call back from the analog telephone for
Caller ID-Station, assign the access code to be
added to the calling station number when an
internal call is terminated.
CM08 Restrict One hit ringing for Call Forwarding-
All Calls. (To restrict all stations in the system)
CM12 Assign Service Restriction Class C to each sta-
tion. (To restrict per Station Class)
CM15 Restrict One hit ringing for Call Forwarding-
All Calls to Service Restriction Class C as-
signed by CM12 Y=07. (To restrict per Station
Class)
END
By the following programming, the Caller ID sender can be set in make busy or in service status.
START
CM45 Assign the make busy condition of the Caller
ID sender.
END
DESCRIPTION
DESCRIPTION
• Y=20
(1) X-XXXXXXXX: Station No.
(2) 0: Calling Party Number
1: Calling Party Number and Calling Party
Name
(1) 507
(2) 0 : Not sent
1 : To send
• Y=00
(1) 8
(2) X-XXXX: Access Code to be added
X: 0-9, A (*), B (#)
(1) 266
(2) 0: Restricted
• Y=07
(1) X-XXXXXXXX: Station No.
(2) 00-15 : Service Restriction Class C
• Y=81
(1) 00-15: Service Restriction Class C as-
(2) 0: Restricted
• Y=5
(1) XX Z
XX: 00-03: SDT Card No. assigned by
CM10/CM14
Z : 0-3: Circuit No.
(2) 0 : Make busy
1 : In service
– 191 –
CALLER ID-STATION
DATA
(Maximum 4 digits)
signed by CM12 Y=07
DATA
NWA-008845-001 Rev.5.0
32ch1003.fm