Philips Sopho 2000 IPS User Manual page 535

To specify the display language for each system, do the following programming:
START
CM12 Specify the display language for a D
each station.
CM60 Specify the display language for an Attendant
console/DESKCON to each ATTCON num-
ber.
CM04 Display language for D
DESKCON LCD (System Base).
NOTE:
A
DESCRIPTION
term
/Attendant console/
When using Series 3600 software or later, a reset of the MP card is not required. When
changing the data with online, the data is valid after the DLC card is unplugged and
plugged in or pull out and reconnect the modular connector of the terminal.
term
to • Y=63
(1) X-XXXXXXXX: Station No.
(2) NONE : As per CM04 Y=00>00
• Y=33
(1) 0-7: ATTCON No.
(2) 31 : As per CM04 Y=00>00
• Y=00
(1) [Series 3200 R6.2 (R6.2) software or
before]
1 : English
2 : French (Canadian French)
3 : Spanish (Latin Spanish)
4 : Portuguese (Brazilian Portuguese)
5 : German
6 : Italian
7 : English
[Series 3300 software or later]
00 : Japanese
01 : English
02 : French (Canadian French)
03 : Spanish (Latin Spanish)
04 : Portuguese (Brazilian Portuguese)
05 : German
06 : Italian
07 : Netherlandish
08 : French (Europe)
09 : Spanish (Europe)
10 : Portuguese (Europe)
11 : Swedish
12 : Danish
13 : Catalan (Europe)
31 : English
– 517 –
MULTIPLE LANGUAGE DISPLAY
DATA
[Series 3800 software required]
NWA-008845-001 Rev.5.0
32ch1008.fm
JUNE/01/2007