Philips Sopho 2000 IPS User Manual page 143

A
CM31 Assign the ACK-WINK Signal to be sent to
the DTI when the signal kind of called number
received from T1 network is DP Signal.
NOTE: • When the Signal Pattern from T1
network is FGD-Format: Assign
the data to "1".
• When the Signal Pattern from T1
network is ANI-Format: Assign
the data to "0".
Assign the number of digits of ANI received
from T1 network.
Assign the number of digits to be deleted from
ANI, if required.
< An example of FGD Format >
Received digits:
Key Pulse + XX + 1234567890 + Stop Pulse
Information digits (2 digits)
• 2 digits deletion
• Identification on the terminal:
CM08 Assign whether ANI is sent to the OAI
terminal or not.
Assign whether ANI is sent to the SMDR
terminal or not.
END
DESCRIPTION
INITIAL
ANI (10 digits)
10 digits (ANI)
AUTOMATIC NUMBER IDENTIFICATION (ANI)
• Y=A
(1) 18: Sending of ACK-WINK Signal on
Receiving DP Signal
(2) 0 : To send
1 : Not sent
• Y=1
(1) 3: ANI Digits from T1 Network
(2) NONE : No data
01-31
• Y=A
(1) 14: Number of Deleting Digits from ANI
(2) NONE : No digit deletion
00
01-10
(1) 462: Sending ANI to OAI terminal
(2) 0 : To send
1 : Not sent
(1) 463: Sending ANI to SMDR terminal
(2) 0 : To send
1 : Not sent
– 125 –
DATA
NOTE
: 1-31 digits
: No digit deletion
: Leading one digit deletion-
Leading 10 digits deletion
NWA-008845-001 Rev.5.0
32ch1002.fm