Split Call Forwarding-All Calls - Philips Sopho 2000 IPS User Manual

SPLIT CALL FORWARDING-ALL CALLS

PROGRAMMING
To activate Split Call Forwarding feature, both Call Forwarding and Split Call Forwarding settings are
required.
START
CM12 Assign Service Restriction Class A for this fea-
ture to the required stations.
CM15 Allow Call Forwarding-All Calls in Service
Restriction Class A assigned by CM12 Y=02.
NOTE:
CM20 Assign the access code for Call Forwarding-
All Calls, Set and Cancel, respectively.
Assign the access code for Split Call Forward-
ing-All Calls, Set and Cancel, respectively.
CM35 To apply this feature to incoming calls, set the
trunk route combinations for Tandem Connec-
tion.
CM36 NOTE:
A
DESCRIPTION
To provide this feature, set "1"
(Allow) for CM15 Y=00, Y=26.
For Resident System Programming,
refer to the Command Manual.
SPLIT CALL FORWARDING-ALL CALLS
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=00 Call Forwarding-All Calls
• Y=26 Call Forwarding-All Calls-Outside
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code (*5, #5)
(2) A010: Call Forwarding-All Calls Set
A011: Call Forwarding-All Calls Cancel
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A180: Split Call Forwarding-All Calls Set
A181: Split Call Forwarding-All Calls
Cancel
• Y=05
(1) 00-63: Trunk Route No.
(2) 1 : Release signal arrives
• Y=0
(1) Incoming Trunk Route No. + Outgoing
Trunk Route No. assigned by CM35 Y=05
(2) 0: Allow
– 150 –
CALL FORWARDING
DATA
signed by CM12 Y=02
NOTE
NOTE
NWA-008845-001 Rev.5.0
32ch1003.fm