Alphanumeric Display - Philips Sopho 2000 IPS User Manual

ALPHANUMERIC DISPLAY

PROGRAMMING
START
CM08 Provide the system with the Name Display
Service.
Provide station number and name display
when an incoming call terminates to a Prime
Line and a My Line.
CM20 Assign the access code for Name Display.
CM08 Specify the time to go back to Date and Time
display after the call answered.
Specify the duration to display the name.
Specify the duration of displaying the name
when the incoming call is answered/the select
key for Calling Number Display and Calling
Name Display or CID key is pressed.
[Series 3300 software required]
Specify the duration of displaying the destina-
tion information when the outgoing call is an-
swered by the destination via CCIS/ISDN.
[Series 3300 software required]
CM35 Assign a trunk name number to each trunk
route.
A
DESCRIPTION
INITIAL
(1) 255
(2) 1 : To provide
(1) 335
(2) 0 : Station No. and name display only
when incoming call terminates to
Prime Line
1 : Station No. and name display when in-
coming call terminates to Prime Line
or My line
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code (62)
(2) A110
See NAME DISPLAY REGISTRATION
FROM D
(1) 120
(2) 0 : 10 seconds later
1 : 6 seconds later
(1) 121
(2) 0 : Until call finished
1 : As per CM08>120
(1) 537
(2) 0 : Until call is finished/key is pressed
again
1 : 6 seconds
(1) 538
(2) 0 : Until call is finished
1 : 6 seconds
• Y=03
(1) 00-63: Trunk Route No.
(2) 00-14: Trunk Name No. 00-14
15 : Kind of trunk route assigned by
CM35 Y=00 is displayed
16-63: Trunk Name No. 16-63
– 25 –
ALPHANUMERIC DISPLAY
DATA
term
. Page 53
NWA-008845-001 Rev.5.0
JANUARY/20/2006
32ch1001.fm