Philips Sopho 2000 IPS User Manual page 221

A
CM76 Provide the calling number development and
specify its Development Pattern for each
Number Conversion Block number assigned
by CM76 Y=00/90.
NOTE: For non-DID on ISDN, Caller ID
calls, this data is not effective and
the data setting of CM35 Y=174 is
effective.
CM2A Assign the Development Block number for
each calling party number.
CM65 Select the two kinds of mode change or the
four kinds of mode change per each tenant.
CM76 Assign the station tenant for each calling party
number.
B
DESCRIPTION
• Y=26
(1) 000-999: Number Conversion Block No.
(2) 0: To provide
(Using Development Pattern 0)
1: To provide
(Using Development Pattern 1)
2: To provide
(Using Development Pattern 2)
• Y=50 Development Pattern 0 assigned by
CM76 Y=26
• Y=51 Development Pattern 1 assigned by
CM76 Y=26
• Y=52 Development Pattern 2 assigned by
CM76 Y=26
(1) X-XX....XX: Calling Party No. (Maximum
(2) 000-999: Development Block No.
NOTE:
• Y=29
(1) 00-63: Tenant No.
(2) 0 : Two kinds of mode (Day Mode, Night
Mode)
1 : Four kinds of mode (Day Mode, Night
Mode, Mode A, Mode B)
• Y=09
(1) 000-999: Development Block No. assigned
(2) 00-63: Station Tenant No.
– 203 –
CID CALL ROUTING
DATA
assigned by CM76 Y=00/90
16 digits)
X: 0-9
Set the different number from the
Number Conversion Block
number assigned by CM76
Y=00/90.
by CM2A Y=50/51/52
NWA-008845-001 Rev.5.0
NOTE
32ch1004.fm