Philips Sopho 2000 IPS User Manual page 48

(2) Data Assignment for Analog Terminal connected to the Analog Port Adapter
START
CM10 Assign an analog terminal station number to
the required LEN.
NOTE:
Assignment Example:
CM10 LEN 000=F 200 for D
CM10 LEN 008=F 300 for Analog Terminal
If level 0 of the LEN is used for the D
CM14
Assign an analog terminal station number to
the required LEN.
[Series 3200 R6.2 software required]
NOTE:
Assignment Example:
CM14 LEN 00000=F 200 for D
CM14 LEN 00008=F 300 for Analog Terminal
If level 0 of the LEN is used for the D
A
DESCRIPTION
The analog terminal station number
must be assigned to the following
LEN.
Analog Terminal LEN=D
+ 8.
For example, when the DLC card is
mounted on LT01 slot;
term
For D LEN: 008-015
For Analog Terminal LEN: 016-
023*
*LT02 slot must be vacant.
term
Primary Extension
The analog terminal station number
must be assigned to the following
LEN.
Analog Terminal LEN=D
+ 8.
For example, when the DLC card is
mounted on LT01 slot;
term
For D LEN: 00008-00015
For Analog Terminal LEN:
00016-00023*
*LT02 slot must be vacant.
term
(1) 000-763: LEN
(2) FX-FXXXXXXXX: Analog Terminal
term
LEN
term
, the adjacent level 0 must be used.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) FX-FXXXXXXXX: Analog Terminal
term
LEN
Primary Extension
term
, the adjacent level 0 must be used.
– 30 –
ANALOG PORT ADAPTER
DATA
Station No.
Station No.
NWA-008845-001 Rev.5.0
32ch1001.fm