Philips Sopho 2000 IPS User Manual page 669

A
CM60 Assign the Charging Class number to
DESKCON.
CM12 Assign tenant number to each station.
CM08 Assign the Pseudo-Answer signal function
when the answer signal (Battery Reversal) has
not been detected within the time assigned by
CM41 Y=0>03 after making an outgoing trunk
call.
NOTE: This data is effective when CM35
Y=04 is set to "1".
CM13
Provide the SMDR service for outgoing calls
to the required stations.
CM30 Assign trunk route and tenant number to each
trunk.
CM35 Specify the type of answer signal from distant
office in outgoing connection for each trunk
route.
Provide SMDR service for outgoing calls to
the required trunk route.
Assign a trunk access code sent to SMDR for
outgoing calls.
B
DESCRIPTION
STATION MESSAGE DETAIL RECORDING (SMDR)
• Y=32
(1) 0-7: ATTCON No.
(2) 00-15 : Class No.
• Y=04
(1) X-XXXXXXXX: Station No.
(2) 00-63: Tenant No.
01 : Tenant No.
(1) 123
(2) 0 : Not sent
1 : To send
• Y=06
(1) X-XXXXXXXX: Station No.
(2) 1 : To provide
• Y=00 Trunk Route
(1) 000-255: Trunk No.
(2) 00-63: Trunk Route No.
• Y=01Tenant Allocation
(1) 000-255: Trunk No.
(2) 00-63: Tenant No.
• Y=04
(1) 00-63: Trunk Route No.
(2) 1 : Battery Reversal from C.O. line
2 : Answer signal arrives from Tie line/
ISDN
7 : Answer signal does not arrive
• Y=14
(1) 00-63: Trunk Route No.
(2) 1 : To provide
• Y=44
(1) 00-63: Trunk Route No.
(2) 00-99: Trunk Access Code
– 651 –
PROGRAMMING
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm
JULY/01/2006