Philips Sopho 2000 IPS User Manual page 219

B
CM12 Assign the number of memory block which is
used for CID Call Back for each D
NOTE 1:
NOTE 2:
NOTE 3:
CM13 Provide the function to register the calling
number into the Redial key on the D
the call is answered, for the required stations.
CM90 Assign the Message Waiting Search key to the
term
D s.
END
HARDWARE REQUIRED
term
D with LCD and DLC card
DESCRIPTION
The memory block cannot be used in
common by multiple stations.
Set the memory block to each D
station respectively.
CM12 Y=38 is not effective for a
Single Line station/Virtual Line
station/PS.
Assign the Start Block No. as fol-
lows:
• 0000-1016: Series 3800 software
or before
• 0000-4086: Series 3900 software
or later
• Y=38
term
station. (1) X-XXXXXXXX: Station No.
(2) XXXX ZZ
XXXX: 0000-4086: Start Block No.
ZZ
term
• Y=41
term
when (1) X-XXXXXXXX: Station No.
(2) 0: To provide
• Y=00
(1) My Line No. +
(2) F0A46: Message Waiting Search
– 201 –
CID CALL BACK
DATA
: Number of Memory Block for CID
Call Back
01 : 8 blocks
02 : 16 blocks
03 : 24 blocks
NONE : 4 blocks
,
+ Key No.
NWA-008845-001 Rev.5.0
32ch1004.fm
JUNE/01/2007