Trunk Queuing-Outgoing - Philips Sopho 2000 IPS User Manual

TRUNK QUEUING-OUTGOING

PROGRAMMING
START
CM12 Assign Service Restriction Class A for Trunk
Queuing-Outgoing to the required stations.
CM15 Allow Trunk Queuing-Outgoing in Service
Restriction Class A assigned by CM12 Y=02.
CM20 Assign the access code for setting and resetting
this service.
CM90 Assign the Trunk Queuing-OG (Call Back)
key to the required D
CM35 Specify the Trunk Queuing-Outgoing capabil-
ity for each trunk route.
END
NOTE: To provide Trunk Queuing-Outgoing in conjunction with Least Cost Routing-3/6 Digit, you
must set Route Pattern No. 000-126 (CM8A Y=0000-0126). Route Pattern No. 127-255 cannot
be used for Trunk Queuing-Outgoing with Least Cost Routing-3/6 Digit.
DESCRIPTION
term
.
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=02
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code (*1, #1)
(2) • If a different access code from Call Back
is used.
A000: Set
A001: Reset
• If the same access code as Call Back is
used.
A004: Set
A005: Reset
• Y=00
(1) My Line No. +
(2) F0000: Trunk Queuing-OG
F0004: Trunk Queuing-OG/Call Back
• Y=28
(1) 00-63: Trunk Route No.
(2) 0 : Restricted
1 : Allow
– 715 –
TRUNK QUEUING-OUTGOING
DATA
signed by CM12 Y=02
,
+ Key No.
NWA-008845-001 Rev.5.0
32ch1011.fm