Philips Sopho 2000 IPS User Manual page 45

To display the Caller ID for each D
the following programming.
[Series 3600 software required]
NOTE: This programming is effective only when CM76 Y=01-04 is set to D03 (Trunk Line [Direct] Ap-
pearance + TAS)/D13 (TAS), or CM30 Y=02/04/40/41 is set to 03 (Trunk Line [Direct] Appear-
ance + TAS)/13 (TAS).
START
CM65 Provide Caller ID Display for each tenant
when an incoming call is terminated to a D
with TAS.
CM57 Specify the My Line number of D
plays the caller ID.
NOTE:
CM13 Provide Caller ID Display for the my line as-
signed by CM57 Y=30.
CM90 Assign the TAS Answer keys to the D
END
term
before answer when an incoming call is terminated with TAS, do
DESCRIPTION
term
The number of stations that can dis-
play the caller ID on LCD is maxi-
mum 8 per tenant.
Set the allocation number to the sta-
tions that displays the caller ID.
• Y=42
term
(1) 00-63: Tenant No.
(2) 0 : To provide
1 : Not provided
that dis- • Y=30
(1) XX YY
XX: 00-63: Tenant No.
YY: 00-07: Allocation No.
(2) X-XXXXXXXX: My Line No.
• Y=54
(1) X-XXXXXXXX: My Line No.
(2) 0 : To provide
1 : Not provided
term
. • Y=00
(1) My Line No. +
(2) F40XX
XX: 00-63: Tenant No. assigned by CM57
– 27 –
ALPHANUMERIC DISPLAY
DATA
,
+ Key No.
Y=30
NWA-008845-001 Rev.5.0
32ch1001.fm
JULY/01/2006