Philips Sopho 2000 IPS User Manual page 677

I
CMDD00 For SMDR terminal 0, specify the buffering
method when the number of the stored SMDR
information has reached to the predetermined
value.
For SMDR terminal 1, specify the buffering
method when the number of the stored SMDR
information has reached to the predetermined
value.
Specify whether the information sent to the
SMDR is metering pulse or charging rate.
[Series 3500 software required]
Specify control of External alarm relay (DK)
when the accumulation rate of billing memory
exceeds the value set by CMDD01>229.
Specify whether the access code is added in
Call Record.
CMDD03 Assign the area code for the calling party for
Call Record.
Assign the area code for the billing office for
Call Record.
J
DESCRIPTION
STATION MESSAGE DETAIL RECORDING (SMDR)
(1) 4
(2) 0 : New data is stored by deleting the old-
est data
1 : No new data is stored
(1) 5
(2) 0 : New data is stored by deleting the old-
est data
1 : No new data is stored
(1) 14
(2) 0 : Metering Pulse
1 : Charging Rate
(1) 126
(2) 0 : Relay ON/OFF
(every 0.5 seconds)
1 : Relay ON
(1) 161
(2) 0 : Not added
1 : To add
(1) 55
(2) 0000-9999: Area Code for Calling Party
(1) 56
(2) 0000-9999: Area Code for Billing Office
– 659 –
PROGRAMMING
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm
DECEMBER/02/2005