Philips Sopho 2000 IPS User Manual page 362

C
CM35 Provide the distinctive ringing patterns to a
term
D in behind PBX.
CM30 Specify the terminating system for incoming
C.O. calls.
Provide the Trunk-Direct Appearances on
term
D .
CM41
Assign the ringing detect timer for incoming
trunk calls.
Assign the main PBX (Centrex) ringing
distinction timer.
Assign the immediate ringing guard timer
from the main PBX (Centrex).
D
DESCRIPTION
NOTE 1 on next page
NOTE 1, NOTE 2 on next page
• Y=87
(1) 00-63: Trunk Route No.
(2) 0 : To provide
1 : Not provided
• Y=02 in Day Mode
• Y=03 in Night Mode
• Y=40 in Mode A
• Y=41 in Mode B
(1) 000-255: Trunk No.
(2) 02: Trunk-Direct Appearances
03: Trunk-Direct Appearances + TAS
• Y=18
(1) 000-255: Trunk No.
(2) 0 : To provide
1 : Not provided
• Y=2
(1) 00
(2) 06-10: 192-320 ms.
If no data is set, the default setting is 256-288
ms.
• Y=2
(1) 40
(2) 01-15: 128-1920 ms.
If no data is set, the default setting is 1280-1408
ms.
• Y=2
(1) 41
(2) 00-90: 0-12672 ms.
If no data is set, the default setting is 384-512
ms.
– 344 –
DISTINCTIVE RINGING
DATA
(32 ms. increments)
(128 ms. increments)
(128 ms. increments)
NWA-008845-001 Rev.5.0
32ch1006.fm