Group Call By Pilot Number Dialing - Philips Sopho 2000 IPS User Manual

GROUP CALL BY PILOT NUMBER DIALING

PROGRAMMING
START
CM11 Assign the Virtual Line station number for
Group Call Pilot Station to the required Virtual
LEN.
NOTE:
CM13 Provide the Virtual Line station with Group
Call By Pilot Number Dialing function.
CM12 Specify the group number which is the destina-
tion of a call from the Group Call Pilot Station.
CM18
To provide the Station Hunting group of the
Group Call Pilot Stations, assign station num-
bers, one by one, as shown below.
1st Operation
2st Operation
NOTE:
A
DESCRIPTION
This Virtual Line station must be ex-
clusively used for Group Call Pilot
Station.
(1)Virtual Line Station A
(2)Virtual Line Station B
(1)Virtual Line Station B
(2)Virtual Line Station C
The number of Virtual Line stations
per Station Hunting group set by
CM18 becomes the maximum num-
ber of simultaneous calling in each
group of Group Call By Pilot Num-
ber Dialing.
GROUP CALL BY PILOT NUMBER DIALING
(1) 000-255: Virtual LEN
[Series 3300 software or before]
0000-1019: Virtual LEN
[Series 3400 software or later]
(2) X-XXXXXXXX: Virtual Line Station No.
• Y=45
(1) X-XXXXXXXX: Virtual Line Station No.
(2) 0: To provide
• Y=43
(1) X-XXXXXXXX: Virtual Line Station No.
(2) 00-19: Group Call No. 00-19
• Y=0
(1) X-XXXXXXXX: Virtual Line Station No.
(2) X-XXXXXXXX: Another Virtual Line
– 400 –
DATA
assigned by CM11
assigned by CM11
assigned by CM11
Station No. assigned by
CM11
NWA-008845-001 Rev.5.0
32ch1007.fm