Philips Sopho 2000 IPS User Manual page 826

A
CMDD31 Assign the each function to the Room Status
Code assigned by CMDD01>12 and 13.
END
HARDWARE REQUIRED
AP00-B/AP00-D card with MRCA program
Front Desk Terminal
DESCRIPTION
HOTEL SYSTEM PROGRAMMING
HOTEL/MOTEL TOLL RESTRICTION CHANGE-GUEST STATION
(1) X 00: Room Cutoff is set
X : 1-8: Room Status Code
(2) 0 : Not available
1 : Set
2 : Reset
(1) X 06: Hotel/Motel Toll Restriction
Change-Guest Station
X : 1-8: Room Status Code
(2) 0 : Not available
1 : Unrestricted (RCA)
2 : Non-Restricted 1 (RCB)
3 : Non-Restricted 2 (RCC)
4 : Semi-Restricted 1 (RCD)
5 : Semi-Restricted 2 (RCE)
6 : Restricted 1 (RCF)
7 : Restricted 2 (RCG)
8 : Fully-Restricted (RCH)
9 : Restriction reset (As per CM12 Y=01)
(1) X 07: Check Out lamp control on DSS
Console
X : 1-8: Room Status Code
(2) 0 : Not controlled
1 : Lamp OFF
2 : Flash (slowly)
3 : Flash (120IPM)
4 : Lamp ON
– 808 –
DATA
NWA-008845-001 Rev.5.0
32ch2001.fm
JUNE/01/2007