Philips Sopho 2000 IPS User Manual page 411

To set the ringing tone setting by Day Mode/Night Mode, do the following programming.
[Series 3700 R12.2 software required]
START
CM08 Provide the change the ringing tone depend on
Day Mode/Night Mode Change.
CMEC Apply Day Mode/Night Mode to all D
NOTE 1:
NOTE 2:
CM90 Assign the setting of D
Mode/Night Mode.
END
DESCRIPTION
This data is effective only when the
2nd data is set to 0.
This command is performed after
CM08>577 is set, or when the sta-
tion tenant number of My Line is
changed by CM12 Y=04.
term
ringing tone by Day
FLEXIBLE RINGING ASSIGNMENT
(1) 577
(2) 0: To provide
term
s. • Y=9
(1) 0
(2) 0 : Start to apply
1 : Now applying
3 : Stand by
• Y=02
(1) My Line No. +
(2) 0 : Day Mode: No ringing/Night Mode:
No ringing
1 : Day Mode: Ringing/Night Mode:
Ringing
2 : Day Mode: No ringing/Night Mode:
Ringing
3 : Day Mode: Ringing/Night Mode: No
ringing
– 393 –
DATA
,
+ Key No. (01-24)
NWA-008845-001 Rev.5.0
32ch1007.fm
JULY/01/2006