Philips Sopho 2000 IPS User Manual page 359

To provide the distinctive ringing patterns to D
ternal call from the main PBX and an external incoming call:
START
CM08 Specify the interval of ringing tones for sta-
tion-to-station calls.
Specify the interval of ringing tones until de-
tecting a ringing frequency from the main PBX
(Centrex). Ringing is sent from D
tection of the ringing frequency.
Specify the lamp indication of D
tecting the kind of incoming call from the main
PBX (Centrex).
The lamp is lit until detection of the ringing
frequency.
Specify the ringing distinction by detecting the
ringing signal from the main PBX (Centrex).
NOTE 1:
NOTE 2:
A
DESCRIPTION
term
term
When the ringer is for an internal call, interval of ringing signal: CM08>138
term
D lamp color: Change to red
term
D tone ringer: CM35 Y=34, 164, CM65 Y=40
When the ringer is for an external call, interval of ringing signal: CM35 Y=33
term
D lamp color: CM35 Y=32
term
D tone ringer: CM35 Y=34, 164, CM65 Y=40
term
s in behind PBX, in order to distinguish between an in-
(1) 138
(2) 0 : External Ringing
1 : Internal Ringing
(1) 380
(2) 0 : As per CM08>381
until de- 1 : As per CM35 Y=33
(1) 381
(2) 0 : No Ringer
1 : Ringing Tone (0.5 seconds) is sent
until de- (1) 382
(2) 0 : Red Steady Light
1 : 120 IPM Flash (As per CM35 Y=32)
(1) 366
(2) 0 : Longer Ringing than CM41
1 : Longer Ringing than CM41
– 341 –
DISTINCTIVE RINGING
DATA
(See Interval of Ringing Tones by
CM08>392/CM08>396/
CM08>397. Page
once
Y=2>40: External call
Shorter Ringing than CM41
Y=2>40: Internal call
Y=2>40: Internal call
Shorter Ringing than CM41
Y=2>40: External call
NWA-008845-001 Rev.5.0
337)
32ch1006.fm