Philips Sopho 2000 IPS User Manual page 309

D
CM41 Specify the various timing for the DTI trunk, if
required.
E
DESCRIPTION
• Y=3
(1) 04: Ringing Signal Detect Timing
(2) 01-15: 32-480 ms. (32 ms. increments)
If no data is set, the default setting is 192 ms.
• Y=3
(1) 05: Release Signal Detect Timing
(2) 01-15: 64-960 ms. (64 ms. increments)
If no data is set, the default setting is 512 ms.
• Y=3
(1) 06: Answer Signal Detect Timing
(2) 01-15: 64-960 ms. (64 ms. increments)
If no data is set, the default setting is 576 ms.
• Y=3
(1) 07: Ringing Signal Detect Time out
(2) 01-15: 512-7680 ms. (512 ms. increments)
If no data is set, the default setting is 7,168 ms.
• Y=3
(1) 08: Guard Timing of DTI release
(2) 01-15: 128-1920 ms. (128 ms. increments)
If no data is set, the default setting is 512 ms.
• Y=3
(1) 09: Hooking Signal sending timing
(2) 01-15: 64-960 ms. (64 ms. increments)
If no data is set, the default setting is 640 ms.
– 291 –
DIRECT DIGITAL INTERFACE
PROGRAMMING
DATA
NWA-008845-001 Rev.5.0
32ch1005.fm
JULY/01/2006